When should I use Acid Machine Clean instead of Machine Clean?

Use Acid Machine Clean when you're battling: Stubborn brake dust Heavy Buildup Rust stains Water spots Mineral deposits on wheels, paint, or trim Oxidation Brighten & Clean Chrome If it looks like it’s been stuck there since 1997, Acid Machine Clean is your go-to. For general grime or bug guts, stick with Machine Clean.

How do I clean my pontoons?

Start by diluting Acid Machine Clean at a 10:1 ratio (10 parts water, 1 part product). Never use it full strength on aluminum. If the surface turns white immediately, the mixture is too strong—rinse right away and dilute further before reapplying. For light cleaning, spray directly onto the pontoon tube, let it sit for 15–30 seconds, then rinse off. For heavier oxidation or waterlines, spray onto a microfiber towel or soft brush, work in small sections, and lightly scrub if needed before rinsing each section. Do not let the product dry on the surface. After cleaning, rinse thoroughly with clean water, then follow with a damp towel and mild soap to neutralize and remove any remaining residue. Once dry, you can apply a metal polish or protectant to enhance shine and help prevent future buildup. Do not use on hot surfaces or in direct sunlight, always wear gloves and eye protection, and never let the product sit or dry.

Is Acid Machine Clean safe on aluminum?

Yes. Acid Machine Clean is safe on coated, painted, polished, and even raw or uncoated aluminum when used properly. Always dilute the product based on the aluminum type up to 10:1 (ten parts water to one part product). If the surface turns white right after spraying, that means the mix is too strong and should be diluted further. Always spot test first, never let it dry, and rinse completely with water followed by soap and water.

Is it safe for all wheels and surfaces?

Nope. Spot test first. Don’t be reckless, always rinse quickly and never let it dry on the surface.

Does it contain Hydrofluoric Acid (HF)?

Absolutely not. That stuff is dangerous. Acid Machine Clean is strong but safe when used correctly. We formulated it to be effective without being sketchy.

Can I use it on chrome, powder coat, or clear coat?

Yes. That’s what it’s made for. Just spot test, and don’t let it dwell too long. Chrome may need a polish after if it’s been neglected.

How do I clean Boat Pontoons without runoff into the water?

Acid Machine Clean is not safe to rinse directly into lakes, rivers, or any body of water. The runoff can harm marine life and ecosystems, so always clean your boat on land or in a controlled setting. To safely clean above the waterline without runoff, use this controlled method: Spray Acid Machine Clean directly onto a microfiber towel—not the boat. Buff it onto the surface in small sections, let it dwell for 15–30 seconds, then wipe off with a clean towel. Follow up with a damp towel and mild soap to neutralize any leftover product. This gives you precision cleaning without risking environmental damage.

Do I need to neutralize it after use?

You don't have to, but we strongly recommend rinsing thoroughly and following up with a soap wash on all surfaces, especially paint, emblems, and aluminum, to remove any residue and rebalance pH.

Acid Machine Clean: Heavy Duty Acid Wheel Cleaner

Name: Acid Machine Clean Heavy Duty Cleaner
Brand: 13 Supplies
SKU: ACID-MACHINE-CLEAN-001
Price: 22.40 USD
Availability: InStock
Rating: 4.9 (331 reviews)

13 Supplies® Acid Machine Clean: Wheel Cleaner & Water Spot Remover

13 Supplies

13 Supplies® Acid Machine Clean: Wheel Cleaner & Water Spot Remover

$21.00

$28.00

Save 25%

5.0

Quantity: 1 Pack

1 Pack 2 Pack 3 Pack 4 Pack

Quantity:

Cuts through brake dust, oxidation, mineral deposits, and road grime fast
Works on wheels, chrome, aluminum, and coated surfaces
Removes buildup that regular cleaners leave behind
Restores shine without damaging your finish
30-day 100% satisfaction guarantee
Made in the USA
Every order supports the Wounded Warrior Project

Always follow label directions and spot test first. Results may vary depending on the surface and application.

FILTHY BRAKE DUST → CLEAN WHEEL

WORKS FAST ON THE TOUGHEST BUILDUP

Before

After

ACID MACHINE CLEAN

KEY FEATURES

CUTS THROUGH HEAVY BRAKE DUST

Built to break down stubborn brake dust, road grime, oxidation, and buildup that regular wheel cleaners leave behind.

PROFESSIONAL-GRADE WHEEL CLEANER

Designed for filthy wheels and rims on trucks, daily drivers, trailers, and heavy-duty vehicles that need serious cleaning power.

WORKS ON MULTIPLE WHEEL FINISHES

Safe on many chrome, painted, powder-coated, clear-coated, and aluminum wheels when used correctly. Always spot test before full application.

MORE THAN JUST A WHEEL CLEANER

Acid Machine Clean is an all purpose acid cleaner. It can also be used on RVs, boats, trailers, farm equipment, chrome, aluminum, and other hard exterior surfaces to help remove oxidation, water spots, mineral buildup, and grime.

Built to break down stubborn brake dust, road grime, oxidation, and buildup that regular wheel cleaners leave behind.

THE LAST WHEEL CLEANER YOU WILL BUY

RESTORES THE MOST NEGLECTED WHEELS

FREQUENTLY ASKED QUESTIONS

If you have any other questions, please chat with our chatbot or email Info@13supplies.com

Is it stronger than a regular wheel cleaner?

Yes. Acid machine clean is more aggressive and designed for heavy contamination that standard cleaners may struggle with.

Do I need to scrub after spraying it on?

Sometimes no, sometimes yes. Light contamination may rinse away easily, while heavily neglected wheels may still need agitation with a brush but it will still be easier to clean with acid than with other cleaners.

Will it remove brake dust?

Yes. Acid wheel cleaners are designed to break down stubborn brake dust, road grime, and heavy buildup quickly.

What precuations should i take?

Wear gloves and eye protection, Don’t breathe it in, Don’t let it dry, Use in shade or on cool surfaces, Rinse anything it touches — even by accident, Spot test and dilute properly (up to 5:1), We’re not responsible for misuse — if you skip the directions and torch your wheels, that’s on you.

How often should I use an acid wheel cleaner?

Use it as needed for heavy buildup, not necessarily for every wash. A maintenance soap is better for routine cleaning.

Is acid wheel cleaner safe on aluminum wheels?

It depends on the aluminum surface and condition. Many aluminum wheels clean up great, but raw, polished, or sensitive aluminum can react differently. Always dilute properly and spot test first.

Can it damage my wheels?

If used improperly, any acid cleaner can damage sensitive surfaces. Always follow dilution directions, avoid hot surfaces, never let the product dry, and rinse thoroughly.

Do I need to dilute it?

For many applications, yes. Starting with a weaker dilution is recommended, especially on sensitive or unknown surfaces.

Is it safe on chrome and powder-coated wheels?

Generally yes when used correctly. Always test a small area first and avoid prolonged dwell times.

Will it turn aluminum white or cloudy?

It can if the surface is sensitive, oxidized, improperly coated, or if the product is too strong or allowed to dry. Proper dilution and rinsing are important.

How long should I leave it on the surface?

Not too long. 15 seconds to a Minute should do the trick. Do not allow it to dry on surface.

Does it contain hydrofluoric acid?

Acid Machine Clean contains no hydrofluoric acid.