When should I use Acid Machine Clean instead of Machine Clean?

Use Acid Machine Clean when you're battling: Stubborn brake dust Heavy Buildup Rust stains Water spots Mineral deposits on wheels, paint, or trim Oxidation Brighten & Clean Chrome If it looks like it’s been stuck there since 1997, Acid Machine Clean is your go-to. For general grime or bug guts, stick with Machine Clean.

How do I clean my pontoons?

Start by diluting Acid Machine Clean at a 10:1 ratio (10 parts water, 1 part product). Never use it full strength on aluminum. If the surface turns white immediately, the mixture is too strong—rinse right away and dilute further before reapplying. For light cleaning, spray directly onto the pontoon tube, let it sit for 15–30 seconds, then rinse off. For heavier oxidation or waterlines, spray onto a microfiber towel or soft brush, work in small sections, and lightly scrub if needed before rinsing each section. Do not let the product dry on the surface. After cleaning, rinse thoroughly with clean water, then follow with a damp towel and mild soap to neutralize and remove any remaining residue. Once dry, you can apply a metal polish or protectant to enhance shine and help prevent future buildup. Do not use on hot surfaces or in direct sunlight, always wear gloves and eye protection, and never let the product sit or dry.

Is Acid Machine Clean safe on aluminum?

Yes. Acid Machine Clean is safe on coated, painted, polished, and even raw or uncoated aluminum when used properly. Always dilute the product based on the aluminum type up to 10:1 (ten parts water to one part product). If the surface turns white right after spraying, that means the mix is too strong and should be diluted further. Always spot test first, never let it dry, and rinse completely with water followed by soap and water.

Is it safe for all wheels and surfaces?

Nope. Spot test first. Don’t be reckless, always rinse quickly and never let it dry on the surface.

Does it contain Hydrofluoric Acid (HF)?

Absolutely not. That stuff is dangerous. Acid Machine Clean is strong but safe when used correctly. We formulated it to be effective without being sketchy.

Can I use it on chrome, powder coat, or clear coat?

Yes. That’s what it’s made for. Just spot test, and don’t let it dwell too long. Chrome may need a polish after if it’s been neglected.

What precautions should I take?

Important: Wear gloves and eye protection Don’t breathe it in Don’t let it dry Use in shade or on cool surfaces Rinse anything it touches — even by accident Spot test and dilute properly (up to 5:1) We’re not responsible for misuse — if you skip the directions and torch your wheels, that’s on you.

How do I clean Boat Pontoons without runoff into the water?

Acid Machine Clean is not safe to rinse directly into lakes, rivers, or any body of water. The runoff can harm marine life and ecosystems, so always clean your boat on land or in a controlled setting. To safely clean above the waterline without runoff, use this controlled method: Spray Acid Machine Clean directly onto a microfiber towel—not the boat. Buff it onto the surface in small sections, let it dwell for 15–30 seconds, then wipe off with a clean towel. Follow up with a damp towel and mild soap to neutralize any leftover product. This gives you precision cleaning without risking environmental damage.

Do I need to neutralize it after use?

You don't have to, but we strongly recommend rinsing thoroughly and following up with a soap wash on all surfaces, especially paint, emblems, and aluminum, to remove any residue and rebalance pH.

Acid Machine Clean: Boat cleaner

Name: Acid Machine Clean Heavy Duty Cleaner
Brand: 13 Supplies
SKU: ACID-MACHINE-CLEAN-001
Price: 22.40 USD
Availability: InStock
Rating: 4.9 (331 reviews)

13 Supplies

13 Supplies® Acid Machine Clean: Boat Cleaner, Water Spot, & Oxidation Remover

$21.00

$28.00

Save 25%

Quantity: 1 Pack

1 Pack 2 Pack 3 Pack 4 Pack

Quantity:

Cuts through stubborn oxidation, hard water spots, mineral deposits, algae stains, and grime
Removes buildup that regular boat soaps leave behind
Built for pontoons, fishing boats, trailers, and exterior marine surfaces
No hydrofluoric acid — serious cleaning power without the dangerous chemistry
30-day 100% satisfaction guarantee
Made in the USA
Every order supports the Wounded Warrior Project

Always follow label directions and spot test first. Results may vary depending on the surface and application.

ACID MACHINE CLEAN

KEY FEATURES

PROFESSIONAL-GRADE MARINE CLEANING POWER

Designed for neglected pontoons, fishing boats, trailers, and exterior marine surfaces that need more than just soap and water.

CUTS THROUGH WATER SPOTS & OXIDATION

Built to help break down stubborn hard water spots, oxidation, mineral deposits, algae stains, and grime on boats and marine surfaces.

MAKES UP TO 10 BOTTLES OF CLEANER

The concentrated formula can be diluted depending on the job, allowing one bottle of Acid Machine Clean to make up to 10 bottles of ready-to-use cleaner. Always start with a weaker dilution ratio and increase strength only if needed, as improper dilution or use can cause surface damage on sensitive materials.

WORKS ON MULTIPLE MARINE SURFACES

Can be used on many aluminum, chrome, painted, fiberglass, and exterior boat surfaces when used correctly. Always spot test before full application.

MORE THAN JUST A BOAT CLEANER

Great for pontoons, trailers, docks, RVs, wheels, and other exterior surfaces exposed to tough water conditions and heavy buildup.

Designed for neglected pontoons, fishing boats, trailers, and exterior marine surfaces that need more than just soap and water.

13 SUPPLIES ACID MACHINE CLEAN

CLEAN YOUR BOAT WITH EASE

THERE IS NO COMPETITON

MAKES ALL OF YOUR CLEANING EASIER!

IMPORTANT DISCLAIMER

READ BOTTLE INSTRUCTIONS. Acid Machine Clean is a professional-grade acid cleaner and must be used as directed. Always follow the instructions on the bottle, work on cool surfaces, and never allow the product to dry on the surface. Spot test before full application, especially on aluminum or sensitive finishes, as different metals and surface conditions can react differently. Dilution may be required depending on the surface and severity of buildup. Improper use may cause discoloration or surface damage.

FAQ

If you have any other questions, please chat with our chatbot or email Info@13supplies.com

WHAT DOES ACID MACHINE CLEAN REMOVE?

Acid Machine Clean is designed to help remove oxidation, hard water spots, mineral deposits, algae stains, grime, and buildup from boats and marine surfaces. When used properly Acid Machine Clean is very effective, make sure to read instructions on Label.

DOES IT NEED TO BE DILUTED?

Dilution depends on the surface and severity of buildup. Always start with a weaker dilution ratio and increase strength only if needed.

WHAT SURFACES CAN IT BE USED ON?

Acid Machine Clean can be used on many aluminum, chrome, fiberglass, painted, and exterior marine surfaces when used correctly. Always spot test before full application.

HOW DO I PREVENT STREAKING OR A CHALKY FINISH?

Always follow the directions on the bottle carefully. Work on cool surfaces, avoid direct sunlight, dilute properly, work in small sections from bottom to top, and never allow the product to dry on the surface. Different metals and aluminum finishes can react differently, so always spot test first before full application.

WILL IT REQUIRE POLISHING?

It depends on how you want your pontoon to look. If you want a mirror-like finish, Acid Machine Clean is a great first step before polishing because it helps remove oxidation, water spots, and buildup. If you simply want your pontoon to look cleaner, brighter, and remove scum lines and grime, then Acid Machine Clean alone may be all you need. Either way, results depend on the condition of the surface and the finish you’re looking for.

CAN IT DAMAGE SURFACES?

Improper use, strong concentrations, or allowing the product to dry can cause discoloration or surface damage on sensitive materials. Always follow directions on the bottle carefully.

DOES IT CONTAIN HYDROFLUORIC ACID?

No. Acid Machine Clean contains no hydrofluoric acid.

CAN I USE IT IN DIRECT SUNLIGHT?

No. Always apply to cool surfaces and avoid direct sunlight or hot surfaces.

WILL IT REMOVE OXIDATION COMPLETELY?

Results vary depending on the surface condition and severity of oxidation. Some heavily neglected surfaces may require multiple applications or polishing after cleaning.

Average answer time: 24h